Electrical Control & Distribution Panels

Product Details:

• the energy saver is for industrial purpose,custom-built and manufactured as per existing site and load conditions of factory / office
  
  energy saver for motor load
  
  es~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings the equipment is best suited for variable load motors such as compressors, lifts, escalators, injection maulding machines etc. The drop of voltage from 3. 3v to 2. 9v (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the microprocessor
  
  system schematics:
  
  • harmonic suppression - designed to eliminate harmonics
  • star connection to optimize the voltage? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
  • power factor improvement to adjust the capacitance to the desired level
  • impedance matching technique is used.
  • active harmonic filters and power optimizers in es~25 energy savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.
  
  low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of power factor correction system in es~25 power saving equipment facilitates improvement in the power factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum pf rebate and avoid leading pf and available for balanced as well as unbalanced loads.
  
  gprs & gsm based esei-smc smart motor controller:
  
  the esei-smc is gsm based intelligent pump controller is primarily designed to provide user, an interface to monitor and operate his/her pump set or electronic motor from remote location with the help of a mobile phone. It also monitors, controls and protectsthe pump/motor in case of abnormal condition of site or pump/motor.
  
  features:
  
  • easy to install
  • suitable for up to 20 hp motor
  • measurement and display of v (ph-ph), i, pf, active power, % unbalance on 7 seg display
  • remote access: start/stop motor / pump set from any location using your cell phone
  • in-built feature of manual start/stop
  • ivrs for controlling the motor/pump set at field.
  • field settable full load current.
  • real time sms alerts for motor operation status & abnormal condition of motor
  • visual indication thru led for motor on/off, operation mode, network
  • strength & fault status
  • safety of motor/starter: automatically detects and protects for abnormal
  • location of the panel, installing esei-smc on user mobile phone user registration using sms
  
  advantage:
  
  • start/stop from mobile phone sitting in a remote location
  • sms alerts for power availability
  • sms alerts for pump/motor operation.
  • continuous monitoring via gprs/gps.
  • saves electricity, water, money, time and labour.  

Product Details:

Product Specification Product DescriptionApfc panel for power factor application to improve power quality for industry and coomercial .

Product Details:

We are the Leading Supplier of Generator Control Panel, we supply this products all over India

Product Details:

THE AUTOMATIC POWER FACTOR CORRECTION PANEL IS CUSTOM-BUILT AND MANUFACTURED AS PER THE CORRECTION NEEDED AT SITE (FACTORY / OFFICE)
With the aim to meet the varied control panel requirements of our customers, we are manufacturing and supplying superior quality distribution panels which are available in standardized as well as customized designs. Comprising incoming ACB or MCCB and outgoings MCCBs or SFUs, Our range of distribution panel is available in compartmentalized construction with IP54 Protection. ?????????????????????

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This Auto Changeover Control Panel are made under the supervision of well-skilled and highly trained professionals using excellent quality materials and the best-chosen equipment. Our clients can avail these products as per their needs and requirement.

Features :

• Efficient performance
• Robust construction
• Reliability and durability.

Product Details:

With the aim to meet the varied requirements of our customers we are manufacturing and supplying superior quality Power Distribution Panel which is available in standardized as well as customized designs comprising of incoming ACB or MCCB and outgoings MCCBs or SFUs.

Product Details:

Product Specification Product Description

We also provide service in cable laying services. We offer install, testing and commissioning of HT & LT cables in trenches, trays and pipes.
Cable laying services in industrial complexes, or over large distances, they are staffed by our expert technicians and engineers who perform cable preparation, jointing, termination, testing, commissioning, maintenance and troubleshooting tasks.
Cable laying services differ in terms of capabilities like may require cable laying services for low voltage (LV), medium voltage (MV) or higher voltage (HV) cables up to 33 KV.

Product Details:

The energy saver is for industrial purpose,custom-built and manufactured as per existing site and load conditions of factory / office

Energy Saver For Motor Load

ES~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings The equipment is best suited for variable load motors such as Compressors, Lifts, Escalators, injection Maulding Machines etc. The drop of voltage from 3.3V to 2.9V (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the Microprocessor

System Schematics:

• Harmonic Suppression - Designed to eliminate Harmonics
• Star connection to optimize the voltage
• Power Factor improvement to adjust the capacitance to the desired level
• Impedance matching technique is used.
• Active Harmonic Filters and Power Optimizers in ES~25 Energy Savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.

Low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of Power Factor Correction System in ES~25 Power Saving Equipment facilitates improvement in the Power Factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

GPRS & GSM Based ESEI-SMC Smart Motor Controller:

The ESEI-SMC is GSM based intelligent pump controller is primarily designed to provide user, an interface to monitor and operate his/her pump set or electronic motor from remote location with the help of a mobile phone. It also monitors, controls and protectsthe pump/motor in case of abnormal condition of site or pump/motor.

Features:

• Easy to install
• Suitable for up to 20 HP Motor
• Measurement and Display of V (ph-ph), I, PF, Active Power, % unbalance on 7 Seg display
• Remote Access: Start/Stop Motor / Pump set from any location using your cell phone
• In-built feature of Manual Start/Stop
• IVRS for controlling the motor/pump set at field.
• Field Settable Full Load Current.
• Real time SMS alerts for Motor operation status & abnormal condition of Motor
• Visual indication thru LED for Motor ON/OFF, Operation Mode, Network
• Strength & Fault status
• Safety of Motor/Starter: Automatically detects and protects for abnormal
• Location of the panel, installing ESEI-SMC on user mobile phone User registration using SMS

Advantage:

• START/STOP from Mobile Phone sitting in a remote location
• SMS Alerts for Power Availability
• SMS Alerts for Pump/Motor Operation.
• Continuous monitoring via GPRS/GPS.
• Saves Electricity, Water, Money, time and Labour.