Energy Savers for Mixed Load Equipment

Product Details:

THE ENERGY SAVER IS FOR INDUSTRIAL PURPOSE,CUSTOM-BUILT AND MANUFACTURED AS PER EXISTING SITE AND LOAD CONDITIONS OF FACTORY / OFFICE

Energy Saver For Motor Load?????????

ES~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings The equipment is best suited for variable load motors such as Compressors, Lifts, Escalators, injection Maulding Machines etc. The drop of voltage from 3.3V to 2.9V (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the Microprocessor

System Schematics:

• Harmonic Suppression - Designed to eliminate Harmonics
• Star connection to optimize the voltage?????????????????????
• Power Factor improvement to adjust the capacitance to the desired level
• Impedance matching technique is used.
• Active Harmonic Filters and Power Optimizers in ES~25 Energy Savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.

Low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of Power Factor Correction System in ES~25 Power Saving Equipment facilitates improvement in the Power Factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

GPRS & GSM Based ESEI-SMC Smart Motor Controller:

The ESEI-SMC is GSM based intelligent pump controller is primarily designed to provide user, an interface to monitor and operate his/her pump set or electronic motor from remote location with the help of a mobile phone. It also monitors, controls and protectsthe pump/motor in case of abnormal condition of site or pump/motor.

Features:

• Easy to install
• Suitable for up to 20 HP Motor
• Measurement and Display of V (ph-ph), I, PF, Active Power, % unbalance on 7 Seg display
• Remote Access: Start/Stop Motor / Pump set from any location using your cell phone
• In-built feature of Manual Start/Stop
• IVRS for controlling the motor/pump set at field.
• Field Settable Full Load Current.
• Real time SMS alerts for Motor operation status & abnormal condition of Motor
• Visual indication thru LED for Motor ON/OFF, Operation Mode, Network
• Strength & Fault status
• Safety of Motor/Starter: Automatically detects and protects for abnormal
• Location of the panel, installing ESEI-SMC on user mobile phone User registration using SMS

Advantage:

• START/STOP from Mobile Phone sitting in a remote location
• SMS Alerts for Power Availability
• SMS Alerts for Pump/Motor Operation.
• Continuous monitoring via GPRS/GPS.
• Saves Electricity, Water, Money, time and Labour. ?????????????????????

Product Details:

THE ENERGY SAVER IS FOR INDUSTRIAL PURPOSE,CUSTOM-BUILT AND MANUFACTURED AS PER EXISTING SITE AND LOAD CONDITIONS OF FACTORY / OFFICE

Energy Saver For Motor Load

ES~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings The equipment is best suited for variable load motors such as Compressors, Lifts, Escalators, injection Maulding Machines etc. The drop of voltage from 3.3V to 2.9V (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the Microprocessor

System Schematics:

• Harmonic Suppression - Designed to eliminate Harmonics
• Star connection to optimize the voltage
• Power Factor improvement to adjust the capacitance to the desired level
• Impedance matching technique is used.
• Active Harmonic Filters and Power Optimizers in ES~25 Energy Savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.

Low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of Power Factor Correction System in ES~25 Power Saving Equipment facilitates improvement in the Power Factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

GPRS & GSM Based ESEI-SMC Smart Motor Controller:

The ESEI-SMC is GSM based intelligent pump controller is primarily designed to provide user, an interface to monitor and operate his/her pump set or electronic motor from remote location with the help of a mobile phone. It also monitors, controls and protectsthe pump/motor in case of abnormal condition of site or pump/motor.

Features:

• Easy to install
• Suitable for up to 20 HP Motor
• Measurement and Display of V (ph-ph), I, PF, Active Power, % unbalance on 7 Seg display
• Remote Access: Start/Stop Motor / Pump set from any location using your cell phone
• In-built feature of Manual Start/Stop
• IVRS for controlling the motor/pump set at field.
• Field Settable Full Load Current.
• Real time SMS alerts for Motor operation status & abnormal condition of Motor
• Visual indication thru LED for Motor ON/OFF, Operation Mode, Network
• Strength & Fault status
• Safety of Motor/Starter: Automatically detects and protects for abnormal
• Location of the panel, installing ESEI-SMC on user mobile phone User registration using SMS

Advantage:

• START/STOP from Mobile Phone sitting in a remote location
• SMS Alerts for Power Availability
• SMS Alerts for Pump/Motor Operation.
• Continuous monitoring via GPRS/GPS.
• Saves Electricity, Water, Money, time and Labour. ?????????

Product Details:

• Low power factor results in a high current, rise in copper loss and reduction of efficiency of the system.
• Incorporation of RTPFC in ES25 Power Saving Equipment facilitates improvement in the Power Factor.
• RTPFC is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

Product Details:

Active Harmonic Filters are parallel filters (which means the current doesn’t go through the filter) that are used to reduce, or mitigate, harmonics to tolerable levels as defined by IEEE-519. Active filters use a set of transistors and capacitors to filter (or clean) the current wave by injecting inverse currents to cancel out the undesired harmonic components. Active filters are significantly more expensive than passive filters and take up more space. Size is an immense factor in system design today and should be accounted for when deciding on what type of harmonic filter is right for you. Active filters can work with multiple drives; when the active filter reaches its limit, it won’t overload. In addition, if an active filter breaks, it won’t stop the motor (since current isn’t going through the filter); it just won’t filter the current wave.

Features:

• Multifunctional: Harmonic, reactive power and imbalance compensation
• High harmonic filtering rate: Up to 98%
• Excellent reactive compensation: High speed, Precise (-0.99≤PF≤0.99), Step-less, Bi-directional (capacitive and inductance) compensation
• Excellent imbalance correction: Both negative and zero sequence, mitigates neutral current Wide input voltage & frequency range, adapts to tough electrical environments Low thermal loss (≤3% of rated APF kVA), efficiency ≥ 97%
• High stability: Infinite impedance to grid, avoids harmonic resonance problems
• Flexible application: Modular design, embedded in standard or customized cabinet
• Easy installation and maintenance: Plug-in installation for APF module replacement and expansion
• Wide capacity range: 50A~525A for a single cabinet, up 10 cabinets in parallel
• Environmental adaptability: -10~50°C temperature, compatible with diesel generator
• Complete protection: Grid Over/Under voltage, APF over current, over temperature, and more. All faults are recorded in the event log, which is convenient for failure analysis

Advantage:

• They offer energy efficiency that can minimize operating costs and keep equipment in working condition for a lot longer.
• They minimize disruptions during the production process.
• They decrease the emission of carbon dioxide as well.

Product Details:

THE ENERGY SAVER IS FOR INDUSTRIAL PURPOSE,CUSTOM-BUILT AND MANUFACTURED AS PER EXISTING SITE AND LOAD CONDITIONS OF FACTORY / OFFICE

The Centralized Lighting Energy Saver or ES 25 Energy Saver is a highly advanced and sophisticated coil based power voltage optimizer that is installed at incoming electricity supply. It uses a tried and tested technology known as voltage or power optimization to control the voltage and suppressing the load harmonics on lighting and mixed load. This lowers the number of kWh consumed, which is what electricity bills are calculated on and thus saves electrical energy.


Additional Features (OPTIONAL) :

• Suitable for both Indoor and Outdoor Application
• Automatic Tap and Bypass system
• APFCR along with ES 25
• Lighting Panel cum Energy Savers
• Energy Saver with High/Low Voltage cutoff

Working Principle:

ES~25 is a high-efficiency device, which optimizes the voltage (Static or dynamic) as the energy consumed increases approximately square of input voltage thereby the output energy would reach to an optimum level, beyond which the energy consumed will be wasted.

The diagram shows energy saving with high-efficiency coil system. The main winding A and secondary winding B which is the inverse, phase energy saving winding. When the supply current passes through winding A, magnetic restriction occurs in winding B as B is connected in series to load, the energy induced due to magnetic restriction from the inverse phase current in winding B is expressed as voltage optimization in the load to reduce the energy to the extent of 20 - 25%.


Benefits Through ES:

• Guaranteed savings up to 25% in lighting and 15% in mixed load
• Centralized installation without de-lamping or re-laming
• Extends the life of discharge lamps and reduces replacement of chokes
• Guards the circuit against high voltage spikes and surges
• Marginal improvement in Power Factor
• Reduction in carbon emission
• Maintenance free with over 20 years life span
• Payback period as low as one year

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

THE ENERGY SAVER IS FOR INDUSTRIAL PURPOSE,CUSTOM-BUILT AND MANUFACTURED AS PER EXISTING SITE AND LOAD CONDITIONS OF FACTORY / OFFICE

Energy Saver For Motor Load?????????

ES~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings The equipment is best suited for variable load motors such as Compressors, Lifts, Escalators, injection Maulding Machines etc. The drop of voltage from 3.3V to 2.9V (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the Microprocessor

System Schematics:

• Harmonic Suppression - Designed to eliminate Harmonics
• Star connection to optimize the voltage?????????????????????
• Power Factor improvement to adjust the capacitance to the desired level
• Impedance matching technique is used.
• Active Harmonic Filters and Power Optimizers in ES~25 Energy Savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.

Low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of Power Factor Correction System in ES~25 Power Saving Equipment facilitates improvement in the Power Factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

GPRS & GSM Based ESEI-SMC Smart Motor Controller:

The ESEI-SMC is GSM based intelligent pump controller is primarily designed to provide user, an interface to monitor and operate his/her pump set or electronic motor from remote location with the help of a mobile phone. It also monitors, controls and protectsthe pump/motor in case of abnormal condition of site or pump/motor.

Features:

• Easy to install
• Suitable for up to 20 HP Motor
• Measurement and Display of V (ph-ph), I, PF, Active Power, % unbalance on 7 Seg display
• Remote Access: Start/Stop Motor / Pump set from any location using your cell phone
• In-built feature of Manual Start/Stop
• IVRS for controlling the motor/pump set at field.
• Field Settable Full Load Current.
• Real time SMS alerts for Motor operation status & abnormal condition of Motor
• Visual indication thru LED for Motor ON/OFF, Operation Mode, Network
• Strength & Fault status
• Safety of Motor/Starter: Automatically detects and protects for abnormal
• Location of the panel, installing ESEI-SMC on user mobile phone User registration using SMS

Advantage:

• START/STOP from Mobile Phone sitting in a remote location
• SMS Alerts for Power Availability
• SMS Alerts for Pump/Motor Operation.
• Continuous monitoring via GPRS/GPS.
• Saves Electricity, Water, Money, time and Labour. ?????????????????????

Product Details:

Centralised Energy Savers for Conventional Lighting Load including LED

Well be with you on every walk of life to identify new opportunities.

ES~25 Energy Saver is a proven and state-of-the-art Energy Saving equipment installed in series to Mains / Sub lighting panel to minimise the wastage of energy and save electricity bills up to 30%.

The device works under the principle of voltage and current optimization technique to reduce wasteful energy and harmonics which results in improvising power quality and reduce demand charges.

The power saving system has award winning Automatic Thyristor controlled equipment to adjust the source voltage, lighting ignition level, time based switching mode etc. etc. to get maximum benefits in terms of conserving energy.

ES~25 Energy Saver system employs low loss high efficiency impedance matching system without de-lamping or re-lamping the existing circuit with its user friendly on load bypass, short circuit protection and remote energy monitoring capabilities.

Project Solution:

• Save energy with payback period as low as 18 months
• Enhance the life of luminaries and reduce the heat in choke / driver Maintenance free with more than 20 years life span
• Complete automation system is available with voltage optimization, harmonics suppression and power factor improvement
• Environmental friendly and reduce the light by almost 50%
• Web based and App monitoring and control facility to save additional energy up to 10%.

Product Details:

We deal in all kind of Energy Savers For Retail Outlets & Supply Chain in pan india with a reasonable price.

The company is engaged in employing reactive power management system and harmonics filtering system Power saving is basically achieved by improving power quality and filtering the power pollution in ac lines.

Product Details:

The energy saver is for industrial purpose,custom-built and manufactured as per existing site and load conditions of factory / office

Energy Saver For Motor Load

ES~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings The equipment is best suited for variable load motors such as Compressors, Lifts, Escalators, injection Maulding Machines etc. The drop of voltage from 3.3V to 2.9V (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the Microprocessor

System Schematics:

• Harmonic Suppression - Designed to eliminate Harmonics
• Star connection to optimize the voltage
• Power Factor improvement to adjust the capacitance to the desired level
• Impedance matching technique is used.
• Active Harmonic Filters and Power Optimizers in ES~25 Energy Savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.

Low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of Power Factor Correction System in ES~25 Power Saving Equipment facilitates improvement in the Power Factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

GPRS & GSM Based ESEI-SMC Smart Motor Controller:

The ESEI-SMC is GSM based intelligent pump controller is primarily designed to provide user, an interface to monitor and operate his/her pump set or electronic motor from remote location with the help of a mobile phone. It also monitors, controls and protectsthe pump/motor in case of abnormal condition of site or pump/motor.

Features:

• Easy to install
• Suitable for up to 20 HP Motor
• Measurement and Display of V (ph-ph), I, PF, Active Power, % unbalance on 7 Seg display
• Remote Access: Start/Stop Motor / Pump set from any location using your cell phone
• In-built feature of Manual Start/Stop
• IVRS for controlling the motor/pump set at field.
• Field Settable Full Load Current.
• Real time SMS alerts for Motor operation status & abnormal condition of Motor
• Visual indication thru LED for Motor ON/OFF, Operation Mode, Network
• Strength & Fault status
• Safety of Motor/Starter: Automatically detects and protects for abnormal
• Location of the panel, installing ESEI-SMC on user mobile phone User registration using SMS

Advantage:

• START/STOP from Mobile Phone sitting in a remote location
• SMS Alerts for Power Availability
• SMS Alerts for Pump/Motor Operation.
• Continuous monitoring via GPRS/GPS.
• Saves Electricity, Water, Money, time and Labour.